 |
Digital luxmeter for inspecting light sources and street illumination, for
monitoring the illumination of workstations and public buildings, as well as
sports and parking facilities, quality control for light sources, quality
assurance for the production of lamps and light fixtures. Very strong light can
be measured with these instruments without the use of any accessories.
With a very high initial sensitivity of 0.01 lux, the MAVOLUX 5032 B USB is
very well suited for measuring minimal illumination intensities as well, for
example emergency lighting. High precision in accordance with class B allows for
use in certification applications and for inspection.
- Precision digital measuring instrument for measuring illuminance in lux
or footcandles
- Luminance measurement in cd/m2, or in footlamberts with
luminance attachment as accessory
- Large measuring ranges - high resolution - classified in accordance with
DIN 5032-7 and CIE no. 69
- The silicon photodiode is color corrected, i.e. its spectral sensitivity
is matched to that of the human eye V(l). The main difference between the
MAVOLUX 5032C and MAVOLUX 5032B is the accuracy with which this matching has
been executed:
Accuracy classified in accordance with DIN 5032-7 and CIE no. 69:
| Type |
Accuracy |
Art. No. |
| MAVOLUX 5032 C USB |
Class C |
M502G |
| MAVOLUX 5032 B USB |
Class B |
M503G |
- Cosine correction for obliquely incident light
- Storage of up to 100 measured values - USB 1.1 interface
- Automatic and manual measuring range selection
- Rugged device design, simple operation
- Dimensions: basic device: 65 x 120 x 19 mm, probe: 31 x 105 x 30 mm,
weight: approx. 200 gr. without battery
- Cable between device and probe:
MAVOLUX 5032 C USB: coil cable,
permanently attached, length: 1.5 m
MAVOLUX 5032 B USB: coil cable with
plug, length: 1.5 m
Available for an additional charge: straight cable
(not coiled), length: 3, 5 or 10 m
Included:
Carrying case, CD ROM with software for displaying measured
values, acquiring measured values and device control, USB cable, battery and
operating instructions
Optional accessories:
Luminance attachment, calculating disc for time/f-stop
combinations and other magnitudes for photography, adapter disc for measurements
at LCD monitors for the avoidance of obliquely incident light
Factory certificate upon request:
Traceability of measurement results to
the national standard maintained by the PTB (German Federal Institute of Physics
and Metrology) is assured by means of the Wi 41G standard scientific lamp. The
factory certificate is required for all applications for which measurements and
testing in accordance with legal directives and regulations are required.
|
