 |
The MetraHit 27M is a rugged, reliable and compact milliohmmeter, multimeter and
a temperature measuring instrument too.
It is very well suited for on-site service, as well as for a wide variety of laboratory
tasks.
Applications apart from general low-ohmig measurements:
- measuring low value contact resistances at welding seams and riveted joints
- determination of low-resistance transitions at outer skins of aercraft (lightning protection, wicktest), and for general
low-resistance measurements.
- Milliohmmeter
3.000 mOhm to 300.00 mOhm with 1 A measuring current and
30.00 mOhm to 30.00 Ohm with 200 mA measuring current
- Kelvin connection (4-wire measurement)
- Resistance measurement from 300 Ohm to 30 MOhm
- Voltage measurement from 3 to 600 V DC and 3 to 600 V AC
with ±30,000 digits
- Frequency measurement from 300 Hz to 3 kHz
- DATA hold memory for up to 1200 measured values
- Continuity and diode testing
- Overload protection
- CSA Certification
- DKD calibration certificate as standard feature
| Type |
27M
|
27I |
27AS
Avionik Set |
| Article Number |
M227A |
M227B |
M227C |
| Standard Equipment |
|
|
|
| Standard Equipment |
27M |
27I |
27I |
| 3x size AA rechargeable NiMH batteries |
• |
• |
• |
| KS17S measurement cable set |
• |
• |
• |
| Operating instructions |
• |
• |
• |
| Short-form operating instructions |
• |
• |
• |
| GH18 protective rubber cover with carrying strap |
• |
• |
• |
| DKD calibration certificate |
• |
• |
• |
| NA Hit 2x power adapter |
|
• |
• |
| KC4 Kelvin-Clip (=2 pieces) |
|
• |
• |
| KC27 Kelvin probe (=2 pieces) |
|
|
• |
| HC30 hard case |
|
|
• |
BD-Pack (including BD232, cable with
METRAwin10) and
METRAwin90-2 software |
|
|
• |
|
