METRAHIT ESPECIAL

4 6/7 Place Special Multimeter for Connection to a Current Transformer . Prevents Any Possible Danger in the Event that Electrical Circuits Are Interrupted During Operation. Digital Multimeter, System Compatible with Data Memory and IR Interface, Resolution: 60,000 Digits - 21 Multimeter Functions (new)

Infrared interface for data exchange and parameters configuration with a PC (optional: IR-USB adapter and METRAwin10 software)
TRMS AC and AC+DC voltage measurement, bandwidths of up to 20 kHz
TRMS AC and AC+DC current measurement, bandwidths of up to 5 kHz
dB measuring function
Adjustable clamp factor for measurement with current sensor and current transformer clamps

... Plus additional functions comparable with METRAHIT PRO

Scope of delivery:
• Multimeter set with HC20 hard case
• KS17-2 measurement cable set
• Rubber holster
• Two 1.5 V AA batteries
• Condensed operating instructions
• CD ROM with data sheet and operating instructions (German and English)
• DKD calibration certificate

	Article No: M252A
	Technical Data » GB » F (pdf 260 kB)
	Operating Instructions » GB (pdf 1003 kB)
	Software METRAwin10/METRAHit
	Accessories (display)

1.	USB X-TRA	Interface adapter infrared to USB for METRAHit X-TRA
2.	NW3A	Shunt resistor 3A, 0.1 Ω class 0,5 600V CAT.IV, 100mV/A
3.	NW300mA	Shunt resistor 300mA, 0.1Ω, class 0,5; 1mV/mA
4.	Z201A	Clip-On Current Transformer 0.01 ..30A_DC / 0.01 ..20A_AC, 100mV/A, 1%, 19mm Ø
5.	Z202A	Clip-On Current Transformer 0.1.. 30/300A_DC/ 0.1.. 20/200A_AC, 10mV/A; 1mV/A, 1%, 19mm Ø
6.	Z203A	Clip-On Current Transformer 1.. 300/1000A_DC/ 1..200/1000A_AC, 1mV/A, 1%, 31mm Ø
7.	Z13B	Clip-On Current Transformer 0,5-60/600A_DC; 0,2-40/400A_AC, 10mV/A; 1mV/A, 1,5%; 2%, 50mm Ø
8.	WZ11B	Clip-On Current Sensor, 0.5 ..20 / ..200A_AC, adjustable
9.	WZ12B	Clip-On Current Sensor, 10mA ... 100A_AC, 100mV/A, ±2%
10.	WZ12C	Clip-On Current Sensor, 1mA ..15A / ..150A_AC, adjustable
11.	Z3512A	Clip-on current sensor 0,1/1/10/100/1000 A_AC, selectable
12.	AF033A	Flexible Current Sensor 0,5..300/3000A:3V, 100-10mV/A, Loop Length 600mm, 1%V_Ausg.+50mV
13.	AF11A	Flexible Current Sensor 0,5A ..1000A (2000A~), 1mV/A, Loop Length 450mm, 1%V_Ausg.+2mV
14.	AF33A	Flexible Current Sensor 0,5.. 3000A:3V, 10-1mV/A, Loop Length 900mm, 1%V_Ausg.+5mV
15.	AF101A	Flexible Current Sensor 0,5..1000/10kA:1V, 1-0,1mV/A, Loop Length 1200mm, 1%V_Ausg.+2mV
16.	WZ12A	Clip-On Current Transformer with Cable, 15...180A_AC, 1mA/A, ±3%
17.	WZ12D	Clip-on current transformer, 30mA ... 150A_AC, 1000:1, 1mA/A, ±2,5%
18.	WZ11A	Clip-On Current Transformer, 1...200A_AC, 1mA/A, 1..3%
19.	Z3511	Clip-On Current Transformer, 4 ... 500 A_AC, 1 mA/A, 3%
20.	Z3512	Clip-On Current Transformer, 0.5 ... 1000 A_AC, 1 mA/A, 0.5 ... 0.7%
21.	Z3514	Clip-On Current Transformer, 1.. 2000A_AC, 1mA/A, 0,5%+0,1A
22.	SM16	Current Measuring Adapter
23.	GH X-TRA	Protective rubber cover and carrying strap for METRAHIT BASE, PRO, X-TRA
24.	HitBag	Cordura belt pouch for METRAHIT and METRAport
25.	F829	Carrying pouch for METRAHit
26.	F836	Ever-ready case for METRAHit with cable compartment
27.	F840	Ever-ready case for 2 METRAHit, 2 adapters + accessory
28.	HC20	Hard case for 1 METRAHit and accessory
29.	HC30	Hard case for 2 METRAHit and accessory
30.	KS17-2	Cable Set, max. 16 A, 1000 V / CAT III, Length 1.30 m
31.	KY95-2	Alligator Clips (1 Pair) for KS17-2
32.	KY96	Plug-On Lugs (1 Pair) for KS17-2
33.	KY95-1	Alligator Clips (1 Pair) for KS17-ONE
34.	KS17S	Cable set with 2 mm Ø steel tips and 120 cm cable, 1000 V / CAT III
35.	KS-NTS	Cable Set with Different Test Probes, max. 20 A, 1000 V CAT III

METRAHIT ESPECIAL

Accessories (hide)