 |
The METRAHIT T-COM cable multimeter is a rugged portable measuring instrument
for use in the field.
It performs measurements for pinpointing errors in
cable networks. It measures all cable and system related parameters such as
voltage, current, resistance, insulation and loop resistance, capacitance and
cable length.
Interruption of a single core, or contact with an open-circuit
core (capacitive asymmetry), is detected by means of polarity reversal and is
indicated at the high-speed logarithmic bar graph display.
- Insulation
resistance measurement (test voltage: 100 V) with simultaneous detection of
interference voltage and polarity reversal for diode testing
- Cable symmetry
testing by means of rapid changeover switching
- Multifunctional multimeter (V,
W, F, Hz)
- TRMS measurement, AC and AC+DC for current and voltage
- Low-pass
filter can be activated (200 Hz / -3 dB)
- Direct current measurement, 100 nA
to 1 A
- Precision temperature indication in °C and °F for Pt100/Pt1000
sensors
- 3¾ place display, 3100 digits, illumination can be activated, analog
display: linear or logarithmic for insulation measurement
- Acoustic signal for
continuity testing, dangerous contact voltages, exceeded overload limits
- Min-Max
value storage
- Data memory and internal clock, power pack adapter socket
- Housing
with IP 54 protection, dust and splash protected, protective rubber cover as
standard feature
- Bidirectional infrared interface for exchanging data with a
PC
- METRAVIEW Windows software as accessory: processing and graphic display
of measured values via RS 232 interface
- New housing design, separate battery
and fuse compartments, intelligent key functions with SMD button
- DKD
calibration certificate as standard feature
- Manufacturer’s guarantee: 3
years material and workmanship,
1 to 3 years for calibration (depending upon
application)
Included:
M246A: digital multimeter with protective rubber
cover, F836 ever-ready case , KS21T cable set, batteries, condensed operating
instructions (English/German), operating instructions, DKD calibration
certificate
|
