 |
For installation in the terminal head of a temperature sensor DIN 43 729, shape B.
For use in process control systems (SPC, PLC). The SINEAX VK 626 converts the
measured quantity (i.e. signal from a thermocouple or resistance thermometer)
into a proportional, analog output quantity.
- Digital communication and power supply via the 2-wire output line
- Measured quantity, measuring range and other parameters programmable with
PC, suitable HART interface and appropriate software
- Electrical isolation between input and output: prevents measurement value
distortion caused by potential transfer
- Measurement output: 4 to 20 mA, 2-wire connection
- Open-circuit sensor and short-circuit monitoring / defined output
performance in the event of disturbance
- Terminals with captive screws
- Available with "intrinsically safe" explosion protection per EEx ia
IIC T6
- Interface: output terminals
| Article No. |
Variants |
Diameter /
height (mm) |
| 141424 |
Standard, with electrical isolation |
43 / height 30,8 |
| 141432 |
EEx ia IIC T6, with electrical isolation |
43 / height 30,8 |
Order other variants with complete order code 626-7.. in
accordance with the data sheet. See data sheet for default configuration.
|
